System Requirements for the DynaPulse 200M

• 386 or faster processor
• 2 MB of RAM
• Serial Communication port available
• Hard disk drive (with 5 MB available for home use, 30 MB for Clinical use)
• 3.5 floppy disk drive

• 486 or faster processor
• 16 MB of RAM
• Serial communication port available
• Hard disk drive (with 5 MB available for home use, 30 MB for Clinical use)
• 3.5 floppy disk drive

• 486 or faster processor
• 32 MB of RAM
• Serial communication port available
• Hard disk drive (with 5 MB available for home use, 30 MB for Clinical use)
• 3.5 floppy disk drive

• System 6.0.7 to 8.6 recommended
• 2 MB of RAM
• Modem or printer port
• Hard disk drive with at least 5 MB of available disk space
• 3.5 floppy disk drive

Due to recent equipment changes from Apple, the DynaPulse will not be compatible with newer Macintosh products. Please read below:

• On the new iMac machine there is no traditional printer or modem ports so the DynaPulse will not operate on this machine.

• On all G3 machines only the modem port works. If a modem port is blocked because of an internal modem the DynaPulse will not operate on this machine. On all 68K (LC series, Centris, Quadra, ii series) and pre-G3 PowerMacs both the modem and printer ports work and the DynaPulse WILL operate on these.